Beko Appliance Repair in Cheadle West & Gatley

What does error code Er 05 mean on a Beko tumble dryer?

Error code Er 05 on a Beko tumble dryer indicates the Start, Pause or Cancel button was pressed during a running programme. This is not a fault. Simply restart the programme by pressing Start again, or select a new programme if needed.

What does error code H7 mean on a Beko dishwasher?

Error code H7 on a Beko dishwasher indicates a heating fault. Switch off the dishwasher and unplug it from the mains. The appliance cannot detect the heater or the heater is not working. Contact a qualified technician as this fault requires professional diagnosis and repair.

What does error code H4 mean on a Beko dishwasher?

Error code H4 on a Beko dishwasher indicates a temperature sensor (NTC) error. Switch off the dishwasher and unplug it from the mains. The dishwasher cannot accurately measure water temperature. Contact a qualified technician as this fault requires professional diagnosis.

What does error code E02 mean on a Beko dishwasher?

Error code E02 on a Beko dishwasher indicates a water flow problem, which may relate to drainage or water inlet depending on your model. Switch off the dishwasher and unplug it from the mains. Clean the filters at the bottom of the dishwasher. Check the drain hose for kinks or blockages. Also verify the water supply tap is fully open and the inlet hose is not kinked. If the error continues, contact a qualified technician.

What does error code Er 01 mean on a Beko tumble dryer?

Error code Er 01 on a Beko tumble dryer indicates the door was opened during the cycle. Close the door securely and do not open it until the programme has finished. Restart the cycle if needed.

How do I use the pyrolytic self-cleaning function on my Beko oven?

First remove all oven accessories such as trays and side racks. Clean the control panel and any removable parts manually. Then start the pyrolytic programme following your manual's instructions. Once complete and cooled, wipe away the ash residue with a damp cloth and water and vinegar solution.

How long should I wait before turning on my Beko fridge freezer after moving?

Leave your fridge freezer to settle for at least 4 hours after moving, keeping it unplugged and upright. This allows the compressor oil to return to its proper location. After switching on, wait up to 12 hours before adding food to ensure the appliance reaches safe storage temperatures.

How do I clean the lint filter on my Beko tumble dryer?

Switch off the dryer and unplug it from the mains. Ensure the dryer is completely cool before cleaning. Open the door, remove the filter from the front of the drum, and clean off lint. If there is significant buildup, wash both parts of the filter under running water in the reverse direction of the lint buildup. Ensure the filter is completely dry before replacing.

How do I clean the pump filter on my Beko washing machine?

Switch off the machine and unplug it from the mains. Locate the filter behind the flap at the bottom front of the machine. Open the flap, place towels underneath to catch water, and rotate the filter counterclockwise to remove it. Clean under running water using a soft-bristled brush to remove debris, then reinstall by turning clockwise until secure.

How do I clean my Beko induction hob?

Disconnect from the mains and ensure the surface is cool. Wipe with warm water, washing up liquid and a soft cloth or sponge. For tougher stains, use a specific induction hob cleaner suitable for your appliance's surface.