Brandt Appliance Repair in Davenport & Cale Green

What does error F6 mean on a Brandt induction hob?

Error F6 on a Brandt induction hob indicates a short circuit in the ceramic plate temperature sensor for zone 2. The affected zone cannot be used until repaired. Contact a specialised technician.

What does error E9 mean on a Brandt dishwasher?

Error E9 on a Brandt dishwasher indicates water leakage has been detected in the base housing, or a control button has been pressed for more than 30 seconds. Do not step in any water on the floor. Turn off the water supply and disconnect from the mains if safe to do so. Contact a specialised technician to inspect for leaks before reusing.

What does error F02 mean on a Brandt oven?

Error F02 on a Brandt oven indicates the oven has overheated beyond safe operating temperature. Switch off the oven immediately and allow it to cool for at least 60 minutes. Ensure adequate ventilation around the appliance. If the error persists after cooling, contact a specialised technician.

What does error E5 mean on a Brandt induction hob?

Error E5 on a Brandt induction hob indicates the IGBT power transistor for zone 1 has overheated. Switch off the hob and allow cooling time. Wait until the residual heat indicator turns off before touching the ceramic surface. Ensure ventilation beneath the hob is not blocked. If the error persists, contact a specialised technician.

What does error d11 mean on a Brandt dishwasher?

Error d11 on a Brandt dishwasher indicates a pressure sensor fault. This is an internal component fault requiring a specialised technician to inspect and replace the pressure sensor.

What does the OK indicator mean on my Brandt fridge?

The OK indicator confirms that the temperature in the coldest area of your refrigerator is below 4°C, which is the safe temperature for food storage. If the OK indicator is not showing, check your temperature settings and avoid opening the door frequently. The indicator should appear within a few hours of adjusting the temperature.

Is it normal for my Brandt induction hob to make noise?

Yes, sounds similar to a clock mechanism may occur when the hob is working. These are normal and related to induction technology. There may also be whistling sounds depending on your cookware.

What should I do if my Brandt dishwasher is overflowing?

If overflow occurs at standstill, this suggests a leakage issue with the solenoid valve. If it happens during filling, the problem could be the pressure switch, hose, compression chamber, or filler valve.

What temperature should I set my Brandt fridge to?

From a health perspective, temperatures between 3°C and 4°C are optimal as they limit the growth of bacteria and mould. When first installing, set to 5°C and check the temperature indicator after 4 hours.

Why are the external walls of my Brandt fridge warm?

This is completely normal operation. The warmth prevents condensation from forming on the outside of your refrigerator. The heat is generated by the condenser coils which release heat extracted from inside the fridge. The walls may feel warmer during hot weather or after adding large amounts of food.