De Dietrich Appliance Repair in Cheadle West & Gatley

What does the E07 error code mean on a De Dietrich boiler?

The E07 error code indicates low water pressure or a hydraulic circulation fault. Check the hydraulic pressure gauge; if below 1 bar, repressurise the system following the manufacturer's instructions. If pressure is correct, press RESET. If the error persists, contact a Gas Safe registered engineer.

What does the C03 error code mean on a De Dietrich washing machine?

The C03 error code means the washing machine cannot complete the spin-dry cycle, typically caused by uneven clothes distribution. Redistribute the laundry evenly in the drum and restart the spin programme. If the error continues, contact a specialist appliance technician.

What does the E12 error code mean on a De Dietrich boiler?

The E12 error code indicates a programming or configuration fault in the boiler's control system. Contact a Gas Safe registered engineer to check and correct the boiler parameters.

What does the D05 error code mean on a De Dietrich dishwasher?

The D05 error code indicates low pump flow during the wash cycle, meaning water is not circulating sufficiently. Clean all filters thoroughly and check spray arms for blockages. If the error persists, contact a specialist appliance technician.

What does the E13 error code mean on a De Dietrich boiler?

The E13 error code indicates the heat exchanger fuse has failed. Contact a Gas Safe registered engineer as the fuse must be replaced by a qualified technician.

What cookware can I use on my De Dietrich induction hob?

Most cookware is compatible with induction. However, glass, terracotta, aluminium without a special base, copper and some non-magnetic stainless steels do not work. You can test compatibility by holding a magnet against the pan bottom - if it sticks, the pan is suitable.

How often should I clean my De Dietrich fridge?

Clean the refrigerator compartment at least once a month. Regularly clean the condenser on the back or underneath the appliance to ensure proper airflow and efficient operation.

How do I clean the drain pump filter on my De Dietrich washing machine?

Before cleaning, disconnect the appliance from the electrical supply. Place a container under the filter to collect water. Use a coin to turn the filter cap anticlockwise, then pull out the filter. Remove any debris or foreign objects, rinse the filter under running water, and reinstall it by turning clockwise until secure.

How do I use the pyrolytic cleaning function on my De Dietrich oven?

Before starting pyrolysis, remove all accessories that are not pyrolysis-safe (sliding rails, baking trays, chrome-plated grills) and any cookware from the oven. The side grills may remain inside. Select a pyrolytic cleaning programme and the oven will heat to a very high temperature (up to 500°C), turning all residues to ash. Do not touch the oven or nearby surfaces during or immediately after the cleaning cycle, as they become extremely hot.

Why won't my De Dietrich washing machine door open after a cycle?

This is a safety feature. The door remains locked for approximately 2 minutes after the cycle finishes, until the drum has fully stopped rotating. Wait a few minutes and then try opening the door again.