Samsung Appliance Repair in Cheadle Hulme South

What does error bE2 or bC2 mean on a Samsung dishwasher?

Error bE2 or bC2 on a Samsung dishwasher indicates a button on the control panel is stuck or being continuously pressed. Turn the dishwasher off and wipe the control panel with a dry cloth to remove any moisture. Gently press each button to ensure none are stuck. If the code persists, contact a qualified technician.

What does Hot error mean on a Samsung washing machine?

The Hot error on a Samsung washing machine indicates the drum temperature is too high, usually occurring when attempting to open the door. Wait for the machine to cool down before opening the door. The machine has safety locks that prevent door opening at high temperatures. If the error appears during a cold wash, turn the machine off, unplug it from the mains, and contact a qualified technician.

What does error 1E, 5E or 8E mean on a Samsung fridge freezer?

Error 1E, 5E or 8E on a Samsung fridge freezer indicates a sensor fault affecting temperature regulation. Turn the fridge off and unplug it from the mains for several minutes, then reconnect. If the code persists, contact a qualified technician as sensor replacement may be required.

What does error HC or HE mean on a Samsung dishwasher?

Error HC or HE on a Samsung dishwasher indicates a high temperature heating issue. The water heating system is not functioning correctly. Turn the dishwasher off and run an empty cycle with detergent. If the code persists, contact a qualified technician.

What does error PC ER or PC CH mean on a Samsung fridge freezer?

Error PC ER or PC CH on a Samsung fridge freezer indicates a communication error in the electronic systems, usually triggered by power surges or cuts. Turn the fridge off and unplug it from the mains for at least 60 seconds, then reconnect. Check your electrical supply is stable. If the code persists, contact a qualified technician.

What should I do if my Samsung tumble dryer is not heating?

First, clean the lint filter as a clogged filter restricts airflow and prevents proper heating. Check that the heat exchanger is clean on heat pump models. Ensure Eco Dry mode is turned off, as this reduces heat during parts of the cycle. Verify the vent hose is not kinked or blocked. Try resetting the dryer by unplugging it for 5 minutes, then plugging it back in. If the dryer still does not heat, contact a qualified technician.

How often should I clean the lint filter on my Samsung tumble dryer?

Clean the lint filter after every load. Using the dryer with a wet or clogged lint filter may cause mould, bad odours, or a decrease in drying performance.

How do I use the dryer function on my Samsung washer dryer?

Samsung washer dryers combine washing and drying in one appliance. You can complete a full wash and dry cycle from one setting, or use dry-only cycles. Depending on your model, you can customise temperature, duration, spin speed and drying level.

How do I adjust the rinse aid level on my Samsung dishwasher?

To adjust the rinse aid level, turn on the dishwasher and press and hold the AUTO or Program button for 5 seconds until the display shows 0:00. Press the appropriate button to enter the rinse aid setting menu and select your preferred level from F1 (minimum) to F5 or F6 (maximum). Wait 5 seconds for the setting to save. A higher number means more rinse aid is dispensed. Use only liquid rinse aid, as powder may clog the dispenser.

How do I reset my Samsung dishwasher?

Unplug the dishwasher or turn off power at the circuit breaker, wait 1 to 5 minutes for the electrical charge to clear, then power it up again.