Subzero Wolf Appliance Repair in Heatons North

What does error code 1021 mean on Wolf M Series ovens?

Error code 1021 on Wolf M Series ovens indicates the upper bake element relay is open. Turn the home circuit breaker off for 30 seconds, then back on again. Retest the unit operation. If the error persists, contact a specialised service technician.

What does error code EC06 mean on Sub-Zero Wolf refrigerators?

Error code EC06 indicates the refrigerator evaporator thermistor has read open or shorted for 10 or more seconds, or is repeatedly reading erratic temperatures. No customer troubleshooting is available for this issue. Contact a specialised service technician to diagnose and replace the faulty thermistor.

What does error code E56 mean on Wolf induction ranges?

Error code E56 on Wolf induction ranges indicates the left secondary control board has detected excessive temperature, triggering a protective shutdown. Allow the unit to cool. Turn the circuit breaker off for 30 seconds, then back on again. If the error persists, contact a specialised service technician.

What does error code F1 mean on Wolf ovens?

Error code F1 on Wolf ovens indicates a door lock fault where the door lock or unlock switches were not sensed within 60 seconds, or the door was slammed during heating mode. Reset the power by turning off the circuit breaker for 30 seconds, then turn it back on. Test the oven by setting it to bake mode. If the error persists, contact a specialised service technician.

What does error code E18 mean on Wolf CT electric hobs?

Error code E18 on Wolf CT electric hobs indicates the power board has experienced a failure. Turn the home circuit breaker off for 30 seconds, then back on again. If the error persists, contact a specialised service technician as the power board likely requires replacement.

How do I clean the blue porcelain interior of my Wolf oven?

Allow the oven to cool completely before cleaning. Remove all oven racks and rack guides for easier access. Use a razor blade to lift baked-on foods from the oven cavity and window. Spray stubborn stains with a mild abrasive cleaner or degreaser and scrub with a non-scratch scouring pad. Do not allow foods high in sugar or acid to remain on the porcelain surface as they may cause permanent discolouration.

Can I stop or shorten the Wolf oven self-cleaning cycle?

Yes, it is entirely possible to halt the self-cleaning function once it is in operation if needed, and it is also possible to set a shorter cleaning process if required.

What does error code E22 mean on my Wolf induction cooktop?

Error code E22 occurs when a pan or utensil is left on the control pad while the cooktop is unlocked. Remove the utensil or pan from the control area. If the error persists after removing the obstruction, contact a qualified technician.

What should a healthy flame look like on my Wolf gas burner?

A natural gas flame should be blue with a deeper blue core. A yellow flame indicates an improper mixture of air and gas or impurities in the gas supply. With liquid propane (LPG), some orange or yellow tipping is normal and may not require adjustment. If you notice unusual flame behaviour, contact a qualified Gas Safe registered engineer.

Why is there water or ice under my Sub-Zero crisper drawer?

Food debris, standing water, or ice built up in the drain trough or drain tube along the back wall may cause this. The drain may be clogged. On some models, the drain trough and tube are only accessible by a qualified technician.