Whirlpool Appliance Repair in Cheadle West & Gatley

What does the F07 error mean on a Whirlpool dishwasher?

The F07 error on a Whirlpool dishwasher indicates a water turbine fault. The turbine that measures water flow is damaged or not functioning correctly. Unplug the appliance from the mains before any inspection. Contact a qualified engineer as the water turbine may need replacing.

What does the E9 error mean on a Whirlpool fridge freezer?

The E9 error on a Whirlpool fridge freezer indicates a freezer high temperature alarm. Check that the door is closing properly and the seal is intact. If the door is closing correctly but the problem continues, unplug the appliance from the mains and contact a qualified engineer.

What does the F12 error mean on a Whirlpool dishwasher?

The F12 error on a Whirlpool dishwasher indicates a communication error between the main board and display. The control systems are not communicating correctly. Unplug the appliance from the mains and wait for 2 minutes. Reconnect and try again. If the fault remains, contact a qualified engineer.

What does the F04 error mean on a Whirlpool dishwasher?

The F04 error on a Whirlpool dishwasher indicates a thermostat fault. The temperature control system is not functioning correctly. Unplug the appliance from the mains before any inspection. Contact a qualified engineer to diagnose and repair the thermostat.

What does the F10 error mean on a Whirlpool dishwasher?

The F10 error on a Whirlpool dishwasher indicates a heating element fault. The element is not working correctly. Unplug the appliance from the mains and contact a qualified engineer to test and potentially replace the heating element.

Why is my Whirlpool washing machine not draining?

If your Whirlpool washing machine is not draining, check the drain filter for blockages. The filter is usually located at the front bottom of the machine. Also check that the drain hose is not kinked or blocked, and ensure it is positioned at the correct height.

How much salt should I put in my Whirlpool dishwasher?

Fill the salt reservoir with approximately 500g to 1kg of dishwasher salt. Use only dishwasher-specific salt, never table salt. The salt container is located at the bottom of the dishwasher interior. Refill when the salt indicator light illuminates.

How do I reset my Whirlpool washing machine?

To reset your Whirlpool washing machine, first unplug it from the power supply and wait for 1-2 minutes. Plug it back in and open and close the door six times within 12 seconds. This resets the door latch mechanism. Alternatively, press and hold the Start/Pause button for 3-5 seconds to cancel the current cycle.

How often should I clean my Whirlpool cooker hood filters?

Grease filters should be cleaned every 2-4 weeks depending on usage. Most metal filters are dishwasher safe. Carbon filters in recirculating hoods cannot be cleaned and should be replaced every 3-4 months.

Why are my dishes wet after a Whirlpool dishwasher cycle?

If dishes remain wet after washing, check the rinse aid dispenser is filled and correctly adjusted. Plastic items tend to retain water as they cool more slowly than glass or ceramic. For best results, open the dishwasher door slightly at the end of the cycle to allow steam to escape. Ensure the heated dry option is selected if your model has this feature.