Baxi Appliance Repair in Cheadle Hulme South

What does the error E135 mean on a Baxi boiler?

Error E135 on a Baxi boiler indicates an internal error with the control system. Try resetting the boiler. If the error persists, contact a Gas Safe registered engineer as the PCB or other internal components may need inspection.

What does the error E133 mean on a Baxi boiler?

Error E133 on a Baxi boiler indicates a gas supply fault or flame failure. If you smell gas, do not operate any electrical switches, ventilate the area if safe to do so, leave the property, and call the gas emergency line from outside. If there is no gas smell, check other gas appliances are working, thaw the condensate pipe if frozen, and ensure the gas meter valve is open. Reset the boiler once and contact a Gas Safe registered engineer if the error recurs.

What does the error H.02.07 mean on a Baxi boiler?

Error H.02.07 on a Baxi boiler indicates persistent low pressure in the heating circuit. Switch off the boiler before repressurising. Repressurise the system using the filling loop and inspect visible pipework for leaks. A heating engineer should investigate if the problem recurs.

What does the error E130 mean on a Baxi boiler?

Error E130 on a Baxi boiler indicates the flue thermostat has tripped due to high flue gas temperatures. Switch off the boiler immediately. If you smell gas, do not operate any electrical switches, ventilate the area if safe to do so, leave the property, and call the gas emergency line from outside. This is a serious safety issue. Do not attempt to reset or operate the boiler. Contact a Gas Safe registered engineer to inspect the flue, combustion, and heat exchanger.

What does the error E.00.20 mean on a Baxi boiler?

Error E.00.20 on a Baxi boiler indicates the flue gas temperature sensor is not connected or measuring a temperature below range. If you smell gas, do not operate any electrical switches, ventilate the area if safe to do so, leave the property, and call the gas emergency line from outside. Contact a Gas Safe registered engineer to inspect the flue sensor.

What temperature should I set my Baxi boiler thermostat to?

The optimal temperature setting depends on your boiler type and personal preference. For central heating, room temperatures of 18 to 21°C are typically comfortable. Lowering your thermostat by just 1°C can reduce heating bills.

How do I repressurise my Baxi boiler?

To repressurise a Baxi boiler, locate the filling loop (usually a flexible silver or chrome pipe beneath the boiler with valves at each end), open both valves slowly while watching the pressure gauge, stop when pressure reaches 1 to 1.5 bar, then close both valves securely.

How efficient are Baxi air source heat pumps?

Baxi air source heat pumps are generally 300 to 400% efficient. This is measured as Coefficient of Performance (COP), meaning the heat pump can create three to four units of energy for every one unit of electricity it uses.

Do I need planning permission for a Baxi heat pump?

Planning permission is usually not required for domestic air source heat pump installations in the UK as they typically fall under permitted development. However, regulations do apply regarding size, positioning, and noise levels.

Can I control my Baxi boiler with a smart thermostat?

Yes, Baxi boilers are compatible with smart thermostats and the Baxi uSense controls. The My Baxi App offers features including Alexa connectivity, holiday mode, scheduling, and temperature control from your smartphone.