Baxi Appliance Repair in Cheadle West & Gatley

What does the error E.01.12 mean on a Baxi boiler?

Error E.01.12 on a Baxi boiler indicates the temperature measured by the return sensor is greater than the flow temperature. This suggests a circulation problem or faulty sensors. Switch off the boiler and contact a heating engineer to investigate.

What does the error E.01.20 mean on a Baxi boiler?

Error E.01.20 on a Baxi boiler indicates the maximum flue gas temperature has been reached. Switch off the boiler immediately. If you smell gas, do not operate any electrical switches, ventilate the area if safe to do so, leave the property, and call the gas emergency line from outside. Do not attempt to restart the boiler. Contact a Gas Safe registered engineer to inspect the flue and combustion system.

What does the error E134 mean on a Baxi boiler?

Error E134 on a Baxi boiler indicates the gas valve has been open too long without gas flowing. If you smell gas, do not operate any electrical switches, ventilate the area if safe to do so, leave the property, and call the gas emergency line from outside. If there is no gas smell, check your gas supply is on and that other gas appliances work. Contact a Gas Safe registered engineer immediately.

What does the error E.04.10 mean on a Baxi boiler?

Error E.04.10 on a Baxi boiler indicates the burner has failed to ignite after four attempts. If you smell gas, do not operate any electrical switches, ventilate the area if safe to do so, leave the property, and call the gas emergency line from outside. If there is no gas smell, check gas supply and for a frozen condensate pipe in cold weather. Reset once and contact a Gas Safe registered engineer if the error returns.

What does the error E160 mean on a Baxi boiler?

Error E160 on a Baxi boiler indicates a fan fault. The fan is essential for safe flue gas removal and the boiler will not operate without it. Contact a Gas Safe registered engineer to inspect the fan motor, wiring, and connections.

Do I need planning permission for a Baxi heat pump?

Planning permission is usually not required for domestic air source heat pump installations in the UK as they typically fall under permitted development. However, regulations do apply regarding size, positioning, and noise levels.

When should I replace my Baxi boiler?

A Baxi boiler typically has an average lifespan of around 10 to 15 years, depending on how well it is maintained. Regular servicing helps the boiler reach the higher end of its lifespan.

How does a Baxi combi boiler work?

A Baxi combi boiler combines heating and hot water delivery in one compact unit. When the room temperature drops below the thermostat setting, the boiler heats the central heating system. When a hot water tap is turned on, a valve inside the boiler diverts heat to the domestic hot water supply until the tap is turned off.

Can I control my Baxi boiler with a smart thermostat?

Yes, Baxi boilers are compatible with smart thermostats and the Baxi uSense controls. The My Baxi App offers features including Alexa connectivity, holiday mode, scheduling, and temperature control from your smartphone.

What is a condensing boiler?

A condensing boiler is a high-efficiency boiler that captures and reuses heat from the flue gases that would otherwise be lost. All modern Baxi boilers are condensing boilers. The technology uses larger heat exchangers to recover almost all the heat, reducing fuel consumption and emissions.