Bosch Appliance Repair in Cheadle Hulme South

What does the E10 error mean on a Bosch washing machine?

The E10 error (also shown as E10/-00/-10/-20) indicates the pump for the intelligent dosing system (i-DOS) is blocked. This error only applies to washing machines with automatic detergent dosing. Switch off and unplug the appliance, then clean the pump unit by removing and cleaning the detergent drawer according to your user manual. Alternatively, the i-DOS system can be deactivated manually until the problem is resolved. If the error persists after cleaning, contact a qualified technician.

What does the E02 or E03 error mean on a Bosch dishwasher?

The E02 or E03 error indicates a main control board relay problem. Reset power at the circuit breaker for 30 seconds. If the error persists, contact a qualified technician as the control board may need repair or replacement.

What does the E92 error mean on a Bosch washing machine?

The E92 error (also shown as E92/-01) indicates low water pressure. Check the water supply tap is fully open and clean the inlet filter mesh. If the water pressure remains low, contact a plumber to investigate your water supply.

What does the E16 or E17 error mean on a Bosch dishwasher?

The E16 or E17 error indicates a water filling problem. Check the water supply tap is fully open and inspect the inlet hose for kinks or damage. Clean the inlet filter if necessary. If the error persists, contact a qualified technician.

What does the E18 error mean on a Bosch dishwasher?

The E18 error indicates water level is too low or there is improper pump function. Check the water supply tap is fully open and verify the inlet hose is not kinked. The water supply should provide adequate flow. If supply appears normal but the error persists, contact a qualified technician.

How do I empty the condensation tank on my Bosch tumble dryer?

Pull the condensation tank out slowly from the appliance. On many models the tank has no screw cap, so keep it upright to avoid spills. Pour the water into a sink. Be aware the water may be warm. Tank design varies by model; consult your instruction manual for the correct procedure.

What is SpeedPerfect on my Bosch washing machine?

SpeedPerfect is a function available on selected Bosch washing machines that reduces programme duration while maintaining washing performance. When activated, it adjusts the wash cycle to clean clothes faster, which can be useful for lightly soiled items or when time is limited. Not all programmes support this option; consult your instruction manual for compatible programmes and estimated time savings on your model.

Why does my Bosch induction hob display an error or turn off?

Common causes include unsuitable cookware, overheating protection activation, or an object on the control panel. Ensure cookware has a flat, ferromagnetic base of appropriate size. If the hob overheats, allow it to cool before resuming cooking. Remove any items from the control area. Error codes vary by model; consult your instruction manual for specific error meanings and recommended actions for your hob.

What does the alarm mean on my Bosch fridge freezer?

Bosch fridges and freezers may sound alarms for various reasons: the door has been left open too long, the internal temperature has risen above safe levels, or there has been a power interruption. Check that doors are fully closed and not obstructed. If the temperature alarm has triggered, avoid opening the door and allow the appliance to cool down. Alarm types and reset procedures vary by model; consult your instruction manual for specific guidance.

How do I clean my Bosch cooker hood filters?

Cleaning methods vary by filter type and model. Metal grease filters can typically be soaked in warm water with mild detergent and rinsed; some are dishwasher safe. Recirculating carbon filters generally cannot be cleaned and require periodic replacement. Consult your instruction manual for the correct procedure and whether your filters are dishwasher safe.