Bosch Appliance Repair in Offerton

What does the E90-01 error mean on a Bosch dishwasher?

The E90-01 error indicates the mains voltage is too low. This is not a fault with the appliance itself. Contact a qualified electrician to have the mains voltage and electrical installation checked. The appliance requires stable voltage to operate correctly.

What does the AL alarm mean on a Bosch fridge freezer?

The AL alarm indicates the freezer temperature is too high and frozen food may be at risk. Check the door is fully closed and there are no obstructions. Press the alarm button to silence the warning and check the temperature display. Avoid overfilling the freezer and ensure ventilation openings are not blocked. If the alarm persists, contact a qualified technician.

What does the E10 error mean on a Bosch dishwasher?

The E10 error indicates a Zeolite chamber heater fault. Reset power at the circuit breaker for 30 seconds. If the error persists, contact a qualified technician for diagnosis and repair.

What does the E01 error mean on a Bosch dishwasher?

The E01 error indicates a heat pump motor circuit fault at the main control board. Reset power at the circuit breaker for 30 seconds. If the error persists, contact a qualified technician for diagnosis and repair.

What does the E18 error mean on a Bosch washing machine?

The E18 error indicates a blockage in the filter, a blockage or kink in the cold water inlet hose, or a blocked or kinked drain hose. Switch off and unplug the machine from the mains before attempting any checks. Check the drainage hose is installed correctly without kinks, clean the drain pump through the service flap, and inspect the cold water inlet hose. If the issue persists after these checks, contact a qualified technician.

How do I clean my Bosch gas hob?

Switch off the hob and ensure the surface is completely cool before cleaning. Clean burners and pan supports using soapy water and a non-wire brush. If pan supports have rubber rests, clean these too. Always dry burners and pan supports completely and ensure burner caps are correctly positioned on the diffuser before use.

What cookware can I use on my Bosch induction hob?

Induction hobs require cookware with a ferromagnetic base. Suitable materials include cast iron, magnetic stainless steel, and specially designed induction-compatible pans. Test your cookware by holding a magnet to the base; if it sticks firmly, the pan is suitable. Avoid aluminium, copper, glass, and non-magnetic stainless steel unless labelled as induction compatible.

Why is my Bosch washing machine not filling with water?

Common causes include a closed water supply tap, kinked inlet hose, blocked inlet filter, or low water pressure. First check that the water supply tap is fully open. Inspect the inlet hose for kinks or damage. The inlet filter may be blocked with debris; consult your instruction manual for the correct procedure to access and clean it. If these checks don't resolve the issue, the inlet valve may require professional attention.

Where can I find the model number (E-Nr) on my Bosch appliance?

The E-Nr (model number) is printed on the rating plate. Typical locations vary by appliance type: washing machines and tumble dryers usually display it on the door frame or inside the door; dishwashers on the inner door edge; fridges and freezers on the inside side wall; ovens on the door frame or behind the door; hobs on the underside. You will need this number to find the correct instruction manual and identify compatible parts.

Is it normal for my Bosch fridge to make noise?

Fridges and freezers produce various sounds during operation. Whether a particular sound is expected depends on your specific model. Ensure the appliance is level and not touching walls or cabinets, which can amplify vibrations. Consult your instruction manual for guidance on expected operational sounds and troubleshooting unusual noises for your model.