AEG Appliance Repair in Brinnington & Stockport Central

What does error code C3 mean on an AEG oven?

Error code C3 on an AEG oven indicates the oven door was open when attempting to start pyrolytic cleaning. Ensure the oven door is fully closed before activating the pyrolytic function. The oven will not start the cleaning cycle until the door is properly secured.

What does error code E60 mean on an AEG tumble dryer?

Error code E60 on an AEG tumble dryer indicates a heating problem - the dryer is not heating correctly. Switch off the appliance and allow it to cool for at least 30 minutes before any inspection. Ensure the dryer has adequate ventilation, clean the fluff filter and condenser unit. If the problem persists after these checks, contact a qualified technician.

What does error code i40, i43 or i44 mean on an AEG dishwasher?

Error codes i40, i43 or i44 on an AEG dishwasher indicate a pressure sensor or water level problem. Unplug for 5 minutes then reconnect. Check and clean all filters and clear any foam from the sump. If the problem persists, contact a qualified technician.

What does error code C4 mean on an AEG oven?

Error code C4 on an AEG oven indicates the Plus Steam or Steam Bake function is still activated while attempting pyrolytic cleaning. Press the Steam Bake button to deactivate it (the indicator light will turn off) before starting the pyrolytic function.

What does error code EF0 or EF3 mean on an AEG washing machine?

Error codes EF0 or EF3 on an AEG washing machine indicate the Aqua Control safety system has activated due to water leakage detection. This can be caused by actual leaks, excessive foam, or an unbalanced load. Switch off the appliance, unplug it from the mains, and turn off the water supply. Allow the appliance to stand for a few hours until any foam subsides. Reduce detergent usage, clean the dispenser drawer and pump filter, and check for leaks. If the problem persists, contact a qualified technician.

Why are my clothes still damp after using my AEG washer dryer?

The most common cause is overloading beyond the drying capacity. Check that your load weight matches the drying capacity, not the washing capacity. Also ensure the lint filter is clean and the condenser unit is not blocked. Clean these components regularly for optimal drying performance.

What does the Child Lock function do on my AEG washing machine?

The Child Lock function locks the control panel to prevent accidental programme changes during a cycle. It also keeps the door locked when activated. To activate or deactivate, typically hold two specific buttons simultaneously for 3 seconds. Check your user manual for the exact button combination for your model.

Why is my AEG fridge making unusual noises?

Some noise is normal during operation. Humming indicates the compressor running, clicking sounds occur when the thermostat switches on and off, and gurgling is refrigerant flowing through the system. Ensure the fridge is level and not touching walls or cabinets. If rattling persists, check that items inside are not vibrating against shelves.

What is the AirDry function on my AEG dishwasher?

The AirDry function automatically opens the dishwasher door slightly at the end of the drying phase. This allows fresh air to circulate, improving drying results naturally without additional energy consumption. The door opens just a few centimetres and is safe in standard kitchen installations. This function can be disabled in settings if not suitable for your kitchen layout.

How do I clean my AEG combination microwave oven?

Allow the oven to cool completely before cleaning. Wipe the interior with a damp cloth and mild detergent after each use. For stubborn stains, heat a bowl of water with lemon juice for 2-3 minutes to loosen residue. Remove and wash the turntable separately. Never use abrasive cleaners or scouring pads.