AEG Appliance Repair in Cheadle West & Gatley

What does error code EH0 mean on an AEG washing machine?

Error code EH0 (and EH1, EH2, EH3) on an AEG washing machine indicates a power supply issue - the voltage may be too low, too high, or unstable. Unplug the appliance. Test the socket with another appliance and check your home's electrical supply is stable. Do not use extension cables. If the problem persists, contact a qualified electrician to inspect your electrical installation.

What does error code CE or CF mean on an AEG tumble dryer?

Error codes CE or CF on an AEG tumble dryer indicate an electronics problem with the control board. Do not use the appliance until the problem is resolved. Unplug the dryer and contact a qualified technician to arrange a repair visit.

What does error code E30 or C3 mean on an AEG washing machine?

Error codes E30 or C3 on an AEG washing machine indicate water has been detected where it should not be, typically due to a leak or pressure sensor issue. Switch off the appliance, unplug it from the mains, and turn off the water supply before any inspection. Check the water inlet hose connections at both the tap and machine, and inspect the door seal for damage. Do not use the appliance until the source of the problem is identified. If the leak source is not visible, contact a qualified technician.

What does error code E6 or E641 mean on an AEG hob?

Error codes E6 or E641 on an AEG hob indicate insufficient power - the hob is connected to only one phase. This often occurs with incorrect installation. Have a qualified electrician check the connection meets the requirements in the installation instructions.

What does error code i30 mean on an AEG dishwasher?

Error code i30 on an AEG dishwasher indicates water has been detected in the base of the appliance. Do not stand in any pooled water near the appliance. If safe to do so, switch off at the mains and turn off the water supply - only unplug if you can do so without risk of water contact. Leave overnight to allow any foam to disperse. Check for visible leaks around the door seal. If the problem persists, contact a qualified technician.

How do I clean the condenser on my AEG tumble dryer?

Check the condenser once a month and clean when dirty or when the condenser symbol flashes on the display. Switch off and unplug the dryer before cleaning. Wear protective gloves when handling the condenser to avoid injury from metal surfaces. For standard condenser dryers, open the condenser cover at the bottom of the machine, unlock and lower the lid, then remove fluff using a vacuum cleaner with brush attachment.

How do I clean the heat exchanger on my AEG washer dryer?

Switch off and unplug the machine before cleaning. Locate the heat exchanger access panel at the front bottom of the machine. Open the cover, remove any visible lint or debris, and use a vacuum cleaner with a brush attachment to clean the fins. Clean at least once a month for optimal drying performance.

How do I clean the exterior of my AEG oven?

Allow the oven to cool completely before cleaning exterior surfaces. Clean aluminium surfaces with a regular soap and water solution. For stainless steel, use a specialised stainless steel cleaner.

When should I clean or replace the carbon filter on my AEG cooker hood?

For hoods in recirculation mode, clean or replace carbon filters after approximately 160 hours of usage, or every 4-6 months. When the hood displays the letter 'C', it's time for maintenance.

Why should I use salt in my AEG dishwasher?

Your AEG dishwasher uses salt to soften the water, which ensures optimal cleaning results. Hard water minerals can leave deposits on dishes and reduce cleaning effectiveness.