AEG Appliance Repair in Cheadle Hulme South

What does error code C4 mean on an AEG oven?

Error code C4 on an AEG oven indicates the Plus Steam or Steam Bake function is still activated while attempting pyrolytic cleaning. Press the Steam Bake button to deactivate it (the indicator light will turn off) before starting the pyrolytic function.

What does error code E40 or E41 mean on an AEG washing machine?

Error codes E40 or E41 on an AEG washing machine indicate a door error - the door is not closed properly or there is a problem with the door lock. Switch off the appliance and give the door a firm push to ensure it is fully closed. Check for laundry caught in the seal. If the problem persists, unplug the appliance and contact a qualified technician.

What does error code C2 mean on an AEG oven?

Error code C2 on an AEG oven indicates the food temperature probe is still connected while attempting pyrolytic cleaning. Disconnect the food sensor from its user-accessible socket (located at the top right inside the oven cavity) before running the pyrolytic function.

What does error code E10 mean on an AEG fridge freezer?

Error code E10 on an AEG fridge freezer indicates the fridge compartment is not cold enough, often after a power failure or placing warm food inside. Set the fridge to a colder temperature or activate Super Cool, and keep doors closed. The error should clear once the correct temperature is reached. If it persists, contact a qualified technician.

What does error code C1 mean on an AEG oven?

Error code C1 on an AEG oven indicates the telescopic shelf supports have not been removed before running pyrolytic cleaning. Remove all telescopic rails, shelves and removable side rails from the oven before running the pyrolytic function.

Why is my AEG condenser tumble dryer taking too long to finish?

Extended drying times are usually caused by blocked filters or a dirty condenser unit. Clean the lint filter after every use and the condenser monthly to maintain optimal performance.

How do I clean the drain pump filter on my AEG washing machine?

Clean the drain pump filter every two months or when error code E20 appears on the display. Ensure any wash cycle has fully completed, then switch off and unplug the machine. Place towels and a shallow container beneath the filter area to catch residual water. Locate the filter at the bottom right of the front panel, remove the cover and filter, then rinse under running water and remove any lint or objects from the recess.

How do I use the steam cleaning function on my AEG oven?

Completely cool down the oven first. Fill the water drawer with approximately 950ml of water and select the steam cleaning function. Standard steam cleaning takes about 30 minutes; Steam Cleaning Plus lasts 75 minutes. After the cycle completes, open the door carefully and keep face and hands away to avoid steam burns.

How often should I descale my AEG washing machine?

Occasionally run a cycle with a washing machine descaling product in an empty drum to prevent limescale build-up, even if your detergent contains water-softening agents. Treat your machine with a deep clean twice a year.

How do I clean my AEG combination microwave oven?

Allow the oven to cool completely before cleaning. Wipe the interior with a damp cloth and mild detergent after each use. For stubborn stains, heat a bowl of water with lemon juice for 2-3 minutes to loosen residue. Remove and wash the turntable separately. Never use abrasive cleaners or scouring pads.