Zanussi Appliance Repair in Davenport & Cale Green

What does Zanussi dishwasher error code i80 mean?

Error code i80 on a Zanussi dishwasher indicates an auto door opener malfunction. Switch off and unplug the dishwasher. Check the filter and sump for foam or debris. Clean all filters, reconnect, and run a cycle with AirDry enabled. If the error persists, contact a qualified technician.

What does Zanussi tumble dryer error code E50 mean?

Error code E50 on a Zanussi tumble dryer indicates a motor or software problem. Switch off and unplug the appliance. Allow the dryer to cool for at least 30 minutes before any inspection. Wait 30 seconds, then reconnect. If the error persists, contact a qualified technician.

What does Zanussi hob error code E4 mean?

Error code E4 on a Zanussi hob indicates that overheating protection has been activated. Switch off the hob and remove cookware to allow it to cool. Wait until the residual heat indicator turns off before touching the hob surface. The error should clear once the hob cools down.

What does the F code mean on a Zanussi induction hob?

The F code on a Zanussi induction hob means cookware has not been detected or has been removed. Switch off the hob before handling cookware. Ensure your cookware is induction compatible (a fridge magnet should stick to the base) and placed centrally on the zone.

What does Zanussi dishwasher error code i40, i43 or i44 mean?

Error codes i40, i43 or i44 on a Zanussi dishwasher indicate a pressure sensor or water level control problem. Switch off and unplug the dishwasher. Wait 5 minutes, then reconnect. Clean the filter and sump, clearing any foam or debris. If the error persists after running a test cycle, contact a qualified technician.

Why is my Zanussi tumble dryer not heating up?

If the filters, condenser or heat exchanger are dirty, the machine may not heat up properly. Clean all filters and the condenser. Also check that the room temperature is between 5°C and 35°C - if the ambient temperature is outside this range, the tumble dryer may not operate correctly. Opening the door during a cycle can delay heating by 20 to 30 minutes each time.

How do I clean the spray arms on my Zanussi dishwasher?

Before cleaning, switch off the appliance and disconnect from the mains. Remove the spray arms and rinse them under running water. Use a thin pointed object such as a toothpick to clear any food particles from the spray holes. Clogged holes can cause poor cleaning results. Check that the spray arms rotate freely after reassembly.

How do I clean my Zanussi tumble dryer filter?

Pull out the fluff filter from the bottom of the door opening - it opens like a book. Empty the lint into the bin and if needed, clean the filter with a vacuum cleaner or wet cloth.

Why won't the door of my Zanussi washing machine open?

The door can be opened approximately 3 to 5 minutes after the end of the washing cycle - this is normal as the door lock needs time to cool down. If there is water inside the machine, the door will not open until the water has been drained. Check if the drain cycle has completed successfully.

How do I clean the condenser on my Zanussi tumble dryer?

Check the condenser once a month and clean it when the condenser indicator flashes on the display. Use a damp cloth or vacuum cleaner with a brush attachment to remove lint. Do not touch the metal surface with bare hands as there is a risk of injury - wear protective gloves. Never operate the dryer when the condenser is blocked with lint as this can damage the machine and increase energy consumption.