Zanussi Appliance Repair in Edgeley

What does Zanussi dishwasher error code i90 mean?

Error code i90 on a Zanussi dishwasher indicates an electronics failure. Switch off and unplug the dishwasher for at least two hours. Reconnect and run any programme. If the error persists, contact a qualified technician. Have your appliance model number ready when requesting service.

What does Zanussi dishwasher error code i50 mean?

Error code i50 on a Zanussi dishwasher indicates a wash motor or pump malfunction. Switch off and unplug the dishwasher. Wait 30 seconds, then reconnect. Check the filter and sump for foam, suds, or debris. If the cycle does not operate normally after cleaning, contact a qualified technician.

What does Zanussi fridge freezer error code E01, E02, E03, E06 or E07 mean?

Error codes E01, E02, E03, E06 or E07 on a Zanussi fridge freezer indicate a sensor warning. These codes require professional diagnosis. Contact a qualified technician to inspect and repair the appliance. Keep food items cool using alternative storage if necessary.

What does Zanussi fridge freezer error code E10 mean?

Error code E10 on a Zanussi fridge freezer indicates the fridge compartment is not cold enough, often after a power failure or when hot food has been placed inside. Set the temperature to a colder setting or activate Super Cool. Keep the doors closed to help the unit reach the correct temperature. Check the air vents are not blocked by food items. If the warning persists, contact a qualified technician.

What does Zanussi oven error code F21 mean?

Error code F21 on a Zanussi oven indicates the starting temperature is too high. The oven has detected a temperature above 40°C at startup. Switch off the oven and allow it to cool completely (at least 60 minutes). Turn the control panel off and on again. If the error persists, contact a qualified technician.

Why does my Zanussi washing machine show an E11 error code?

The E11 error code indicates that the machine is not filling with water. Check that the water supply is turned on, hoses are correctly attached and not kinked, and the inlet filter screens are not blocked.

Why won't my Zanussi dishwasher start?

The appliance will only start when the door is detected to be fully closed. Open and close the door again - you should hear an audible click. Check if a previous setting like Delay Start is still active, or if the previous programme is still running.

What does the i30 error code mean on my Zanussi dishwasher?

The i30 error code indicates that water has collected in the base of the appliance, triggering the anti-flood protection device. This may be caused by an internal leak, in which case a visit from a qualified technician is recommended. Occasionally, excessive foam can also trigger this error - switch off the dishwasher at the mains and leave it overnight to allow the foam to disperse before trying again.

How can I improve my Zanussi cooker hood performance?

Switch on the cooker hood approximately 15 minutes before you start cooking. This allows suction to form and the hood will more readily remove vapours and odours without needing higher, noisier fan speeds.

How do I clean the condenser on my Zanussi tumble dryer?

Check the condenser once a month and clean it when the condenser indicator flashes on the display. Use a damp cloth or vacuum cleaner with a brush attachment to remove lint. Do not touch the metal surface with bare hands as there is a risk of injury - wear protective gloves. Never operate the dryer when the condenser is blocked with lint as this can damage the machine and increase energy consumption.