Teka Appliance Repair in Cheadle Hulme South

What does the Err5 error mean on a Teka washing machine?

The Err5 error on Teka washing machines indicates a water level error where the required level has not been reached within 8 minutes. Ensure the water tap is fully open and has adequate pressure. Check that the drain hose is installed at the correct height (80-100 cm) and is not submerged in water. If problems persist, contact a specialist technician.

What does the E4 error mean on a Teka induction hob?

The E4 error on Teka induction hobs indicates a communication failure between the user interface and the induction heating element. Switch off the hob at the mains and wait 10 minutes before switching it back on. If the error persists, contact a specialist technician as the control board or wiring may need inspection.

What does the UNB error mean on a Teka washing machine?

The UNB error on Teka washing machines indicates an unbalanced load where the spin cycle has failed due to uneven distribution of laundry in the drum. Open the door and redistribute the laundry evenly around the drum. Reduce the load size if it is too large and restart the spin cycle. If the problem persists with balanced loads, contact a specialist technician.

What does the Err6 error mean on a Teka washing machine?

The Err6 error on Teka washing machines indicates a motor error. Contact a specialist technician immediately and do not attempt to use the machine until the motor has been inspected.

What does the E1 error mean on a Teka dishwasher?

The E1 error on Teka dishwashers indicates a water filling issue or that the anti-flooding system (Acquastop) has been triggered. Check that the water tap is fully open and verify the water pressure is adequate. Inspect the inlet hose for kinks or blockages. If the anti-flooding system has been triggered due to a leak, turn off the water supply and contact a specialist technician.

When should I refill the salt in my Teka dishwasher?

Refill the salt container when the salt indicator light illuminates on the control panel. Only use salt specifically designed for dishwashers, as table salt will damage the water softener. Fill the container with approximately 1.5kg of dishwasher salt, screw the cap back tightly, and start a wash programme immediately to prevent salt residue from remaining at the bottom of the machine.

How do I clean the metal filters on my Teka cooker hood?

Release the anchoring points to withdraw the filters. Clean them by soaking in hot water with neutral detergent until the fat dissolves, then rinse under the tap. Alternatively, they can be washed in a dishwasher.

How often should I clean the pump filter on my Teka washing machine?

Clean the pump filter every 2 months to maintain optimal performance. The filter is located behind a cover on the front lower right corner of the machine.

How do I use the defrost function on my Teka microwave?

Press the defrost button and enter the weight of the food using the number keys. The microwave will automatically calculate the appropriate defrosting time based on the weight entered. The defrost power is preset and cannot be changed.

How often should I clean the filters on my Teka dishwasher?

The filters should be cleaned regularly to prevent buildup of food particles and debris. It is essential to keep them clean as the dishwasher cannot function properly if the filters are clogged.