Teka Appliance Repair in Cheadle West & Gatley

What does the E1 error mean on a Teka dishwasher?

The E1 error on Teka dishwashers indicates a water filling issue or that the anti-flooding system (Acquastop) has been triggered. Check that the water tap is fully open and verify the water pressure is adequate. Inspect the inlet hose for kinks or blockages. If the anti-flooding system has been triggered due to a leak, turn off the water supply and contact a specialist technician.

What does the C82 error mean on a Teka induction hob?

The C82 error on Teka induction hobs indicates excessive temperature on the glass surface, typically caused by an empty pot or pan being heated. The hob will switch off automatically. Remove the pot or pan from the cooking zone and allow the glass to cool down completely. Never heat empty cookware on an induction hob. If the error persists after cooling, contact a specialist technician.

What does the E3 error mean on a Teka refrigerator?

The E3 error on Teka refrigerators indicates a problem with the refrigerator compartment temperature sensor. This sensor monitors the temperature in the main fridge section. Contact a specialist technician as the sensor may need inspection and replacement. Temperature regulation in the refrigerator section may be affected until repaired.

What does the E5 error mean on a Teka dishwasher?

The E5 error on Teka dishwashers indicates a water intake malfunction where the appliance does not take in water correctly. Verify the water tap is open. Check the water intake hose for kinks or blockages. Inspect the inlet filter for debris. If the problem persists after these checks, contact a specialist technician.

What does the E8 error mean on a Teka freezer?

The E8 error on Teka freezers indicates an ice sensor failure where the sensor located behind the ice tray is either short-circuited or open. This fault affects ice production and will halt the ice maker until repairs are made. Contact a specialist technician as the ice sensor will need testing and likely replacement.

Which detergent compartment should I use in my Teka washing machine?

Most washing machines have three compartments marked I, II, and *. Compartment I is for pre-wash detergent, compartment II is for the main wash cycle, and * is for fabric softener. Compartment II is used most frequently.

Why is there water remaining inside my Teka dishwasher at the end of the programme?

If water remains after the wash cycle completes, it usually indicates a drainage issue. Check that the drain pipe is not clogged or kinked, and ensure the dishwasher filters are clean.

Why is my Teka washing machine vibrating excessively?

Excessive vibration is often caused by the machine not being level. Adjust the feet to ensure the machine is perfectly level. The problem can also be caused by overloading the drum.

How do I properly load my Teka washing machine?

Never overload the machine as this affects washing results. Load the machine to the maximum capacity shown in the programme table for each programme to save energy and water effectively.

How should I maintain my Teka refrigerator?

Clean surfaces that contact food regularly, along with accessible drainage systems. The rubber door seals should be cleaned regularly to prevent bacteria and mould growth, as they are warmer than the interior.