Teka Appliance Repair in Heatons North

What does the E3 error mean on a Teka dishwasher?

The E3 error on Teka dishwashers indicates a heating phase error where the appliance is not reaching the required temperature within the preset time. Restart the washing programme to see if the error clears. If it persists, contact a specialist technician as the heating element or sensor may need replacing.

What does the E7 error mean on a Teka dishwasher?

The E7 error on Teka dishwashers indicates a pressure switch failure with an open circuit detected. Contact a specialist technician as this fault requires inspection and likely replacement of the pressure switch or reconnection of wiring.

What does the E8 error mean on a Teka freezer?

The E8 error on Teka freezers indicates an ice sensor failure where the sensor located behind the ice tray is either short-circuited or open. This fault affects ice production and will halt the ice maker until repairs are made. Contact a specialist technician as the ice sensor will need testing and likely replacement.

What does the E0 error mean on a Teka refrigerator?

The E0 error on Teka refrigerators indicates a problem with the freezer compartment temperature sensor. This sensor monitors the temperature inside the freezer section. Contact a specialist technician as the sensor may need testing and replacement. The refrigerator may continue to operate but temperature control in the freezer may be affected.

What does the C90 error mean on a Teka induction hob?

The C90 error on Teka induction hobs indicates that the on/off sensor is obstructed, preventing the hob from switching on. Remove any objects from the touch control area. Clean the control surface thoroughly and dry it completely. The error should clear automatically once the sensor is no longer obstructed.

Why is there water remaining inside my Teka dishwasher at the end of the programme?

If water remains after the wash cycle completes, it usually indicates a drainage issue. Check that the drain pipe is not clogged or kinked, and ensure the dishwasher filters are clean.

Why won't my Teka washing machine door open after the cycle?

The door has a safety lock that remains engaged for approximately 2 minutes after the cycle completes. Wait for the lock to release before attempting to open the door. If the door still won't open, check if there is water remaining in the drum, as the door will not unlock until the water drains. Try running a drain or spin cycle. You can also try unplugging the machine for 20-30 minutes to reset the electronic lock.

What temperature should I set my Teka fridge and freezer to?

The fridge compartment should be set between 0°C and 8°C, with 3-4°C being optimal from a health perspective as this limits bacterial and mould growth. The freezer should be set to -18°C or -20°C for normal operation.

Why is my Teka microwave beeping but not starting?

The child lock feature may be activated. To deactivate it, press and hold the corresponding button for 3 seconds until you hear a long beep indicating the lock has been released.

Why do my glasses come out white or cloudy from my Teka dishwasher?

White marks or cloudiness on glasses typically occurs when rinse aid is insufficient or the water hardness settings are incorrect. Lime traces remain on dishes when rinse aid levels are too low.