Teka Appliance Repair in Davenport & Cale Green

What does the E6 error mean on a Teka dishwasher?

The E6 error on Teka dishwashers indicates a water drainage malfunction where the appliance does not pump out the water correctly. Clean the filter at the bottom of the dishwasher. Check that the drain hose is not kinked or blocked. Verify the siphon connection is clear. If the issue persists, the drain pump may need replacing by a technician.

What does the E7 error mean on a Teka dishwasher?

The E7 error on Teka dishwashers indicates a pressure switch failure with an open circuit detected. Contact a specialist technician as this fault requires inspection and likely replacement of the pressure switch or reconnection of wiring.

What does the Err5 error mean on a Teka washing machine?

The Err5 error on Teka washing machines indicates a water level error where the required level has not been reached within 8 minutes. Ensure the water tap is fully open and has adequate pressure. Check that the drain hose is installed at the correct height (80-100 cm) and is not submerged in water. If problems persist, contact a specialist technician.

What does the Err6 error mean on a Teka washing machine?

The Err6 error on Teka washing machines indicates a motor error. Contact a specialist technician immediately and do not attempt to use the machine until the motor has been inspected.

What does the F symbol mean on a Teka induction hob?

The F symbol on Teka induction hobs indicates that a cooking zone is activated but no suitable pot or pan has been detected. Place an induction-compatible pot or pan centrally on the cooking zone. The cookware must have a magnetic base and be the correct size for the zone. If the symbol persists with suitable cookware in place, contact a specialist technician as there may be a fault with the pan detection system.

How should I maintain my Teka dishwasher?

Clean the outer surfaces and door lining regularly using a soft cloth moistened with water or mild detergent suitable for painted surfaces. Clean the door gaskets with a damp sponge. After every wash, turn off the water supply and leave the door slightly open to prevent moisture and odours from being trapped inside.

How do I clean the metal filters on my Teka cooker hood?

Release the anchoring points to withdraw the filters. Clean them by soaking in hot water with neutral detergent until the fat dissolves, then rinse under the tap. Alternatively, they can be washed in a dishwasher.

Why is my Teka microwave beeping but not starting?

The child lock feature may be activated. To deactivate it, press and hold the corresponding button for 3 seconds until you hear a long beep indicating the lock has been released.

How often should I clean the pump filter on my Teka washing machine?

Clean the pump filter every 2 months to maintain optimal performance. The filter is located behind a cover on the front lower right corner of the machine.

Why won't my Teka washing machine door open after the cycle?

The door has a safety lock that remains engaged for approximately 2 minutes after the cycle completes. Wait for the lock to release before attempting to open the door. If the door still won't open, check if there is water remaining in the drum, as the door will not unlock until the water drains. Try running a drain or spin cycle. You can also try unplugging the machine for 20-30 minutes to reset the electronic lock.